产品banner
your current location : Home >> 连云港2W water solenoid valve

连云港2W-400-40B

2021-06-05 15:41:42
second
连云港2W-400-40B
Detailed introduction:

网络优化资料:

1. The cleanliness of the inner surface of the solenoid valve.


The inner hole finish is an important factor affecting the frictional resistance of the valve stem and the valve body. A good inner hole finish can effectively reduce the friction coefficient. The inner hole finish can reach RZ1.6 or less, or Ra0.5 (the maximum can reach Ra0.02 ). Through the use of diamond tools to carry out CNC machining or honing of the inner hole, the valve body is surface treated and the valve core is assembled, and then the valve body is polished, so that it is gradually mature in the domestic pilot solenoid valve, and it is completely achievable ;


(2) Straightness in the valve cavity.


Many valve manufacturers do not pay attention to this form and position tolerance, but the response speed of many valves is not fast, or the action of the stainless steel solenoid valve is unstable, which is due to the poor straightness of the inner hole processed by the valve body. Ordinary high-pressure solenoid valves and high-frequency solenoid valves have small holes in the valve body. They are commonly used with a diameter of 5-12mm and are difficult to process. The stainless steel solenoid valve processing tool is relatively thin. Good, so the rigidity of the tool holder should be given priority in the tool design, and the inner hole will undergo subsequent honing and polishing treatments to control the straightness below 0.01;


2W-400-40B

Label

Recent:

  • 24小时服务热线:

    24小时服务热线:

    15058423660
  • 公司地址:

    公司地址:

    余姚市三七市镇三七市村冯家8号
  • 扫一扫联系我们
    扫一扫联系我们
  • 扫一扫关注我们
    扫一扫关注我们
Technical Support: 华企立方
  • home
  • tel
  • top