产品banner
your current location : Home >> 连云港Stainless steel solenoid valve

连云港2W-250-25BS

2021-06-05 15:38:01
second
连云港2W-250-25BS
Detailed introduction:

网络优化资料:

The gas gate valve is a special valve for gas elastic sealing which is different from the flat gate valve. The elastic sealing characteristics of the gas gate valve are similar to the elastic seat structure of the fixed ball valve. The sealing seats on both sides of the gate are of elastic floating structure, and the sealing surfaces are always tightly interlocked during the fully open and fully closed processes, and can compensate for the wear of the sealing pair. It is suitable for the sealing surface under high pressure. The valve can be airless when it is fully open or fully closed. Even if the remaining gas in the valve cavity of the water pipe solenoid valve is dispersed, there is still no pressure in the valve cavity, which is beneficial to the safe construction of the downstream pipeline of the valve and greatly reduces the stoppage before construction. Gas preparation time.


Rubber-sealed gas gate valves have two connection forms: flanged and welded. The flanged type is the traditional connection method. The welded type can directly weld the valve to the pipeline, saving pipe laying costs. This kind of valve can be buried directly without a valve manhole cover, which brings convenience to construction.


When the gas gate valve is fully opened, the elastic sealing pipe is similar to the pipe section of the same diameter in the same pipe section, and the flow resistance is extremely small. Moreover, all the sealing surfaces are not in contact with the medium, the gas adhesive in the artificial coal gas cannot be attached to the sealing surface, and the dust and debris in the natural gas cannot be scraped off the parts.


The fully enclosed elastic sealing gas gate valve retains the advantages of the elastic sealing gas gate valve, and adds a structure to prevent foreign matter from falling into the valve cavity. In the case of more gas dust, it overcomes the biggest disadvantage of the gas gate valve: accumulation in the valve cavity In the case of debris, the refrigeration solenoid valve causes the gate plate to be left and cannot be sealed, the butterfly valve products are used in the gas pipeline with particularly serious dust.


In gas pipelines, especially underground gas pipelines, elastic sealing gas gate valves are used. According to the analysis of foreign investigations, many countries use elastic flat gate valves on pipelines. Compared with ball valves, the elastic flat gate valves of the same diameter have flame-retardant properties, and the price is about 30% cheaper than ball valves, and the use effect is the same.


The disadvantage of rubber-sealed gas gate valve is that the structure is relatively large, with 4 nominal diameter heights. Because it is buried in the ground, the height on the central axis of the pipeline is the same as that of ordinary gate valves. Its disadvantages are not obvious. The main reason is that the height of the lower half is higher than that of ordinary gate valves. The gate valve is large and the buried depth is large during construction, but generally does not affect the laying of the pipeline.


2W-250-25BS

Label

Last: 2W-160-15BS2021-06-05
Next: 2W-320-32BS2021-06-05

Recent:

  • 24小时服务热线:

    24小时服务热线:

    15058423660
  • 公司地址:

    公司地址:

    余姚市三七市镇三七市村冯家8号
  • 扫一扫联系我们
    扫一扫联系我们
  • 扫一扫关注我们
    扫一扫关注我们
Technical Support: 华企立方
  • home
  • tel
  • top