产品banner
your current location : Home >> Products >> Burner solenoid valve

Plastic-encapsulated coil junction box type 10 stainless steel solenoid valve

2021-06-05 15:21:46
second
Plastic-encapsulated coil junction box type 10 stainless steel solenoid valve
Detailed introduction:

Network optimization information:


Ball valves include: floating ball valve, fixed ball valve, orbital ball valve, V-shaped ball valve, three-way ball valve, stainless steel ball valve, cast steel ball valve, forged steel ball valve, ash discharge ball valve, anti-sulfurization ball valve, pneumatic ball valve, electric ball valve, card sleeve ball valve , Welded ball valves, etc.


According to the classification of shell/body material, ball valves can be divided into:


Metal material valves: such as carbon steel valves, alloy steel valves, stainless steel valves, cast iron valves, titanium alloy valves, Monel valves, copper alloy valves.


Car doors, aluminum alloy valves, lead alloy valves, etc.


Valves lined with metal valve bodies: for example: rubber-lined valves, fluorine-lined valves, lead-lined valves, rubber-lined valves, porcelain-lined valves, etc.


Non-metallic valves: such as ceramic valves, glass valves, plastic valves, etc.


There are many ball valve manufacturers in my country, and the connection sizes are also not uniform. It is mainly divided into the following categories:


The ball valve ball is floating. Under the action of the medium pressure, the pilot solenoid valve manufacturer's ball can produce a certain displacement, and it is close to the sealing surface of the outlet end to ensure the seal of the outlet end.


Ball valve structure:


The sealing performance is good, but all the load of the sphere bearing the working medium is transmitted to the outlet sealing ring, so it is necessary to consider whether the sealing ring material of the two-position five-way solenoid valve can withstand the load of the sphere medium. When subjected to high pressure impact, the sphere may be displaced. This structure is generally used for medium and low pressure ball valves.


The ball of the ball valve is fixed and does not move after being compressed. The fixed ball valve is equipped with a floating valve seat. When subjected to medium pressure, the valve seat will move, so that the sealing ring is fastened to the sphere to ensure sealing. Generally, the bearings are installed on the upper and lower shafts of the ball, and the torque distance is small, which is suitable for high pressure and large diameter valves.


Plastic-encapsulated coil junction box type 10 stainless steel solenoid valve

Label

Recent:

  • 24小时服务热线:

    24小时服务热线:

    15058423660
  • 公司地址:

    公司地址:

    余姚市三七市镇三七市村冯家8号
  • 扫一扫联系我们
    扫一扫联系我们
  • 扫一扫关注我们
    扫一扫关注我们
Technical Support: 华企立方
Copyright © 余姚森祺电磁阀厂Record number: 浙ICP备19011108号
  • home
  • tel
  • top