产品banner
your current location : Home >> 连云港Brass underwater solenoid valve

连云港2A-32

2021-06-05 13:44:15
second
连云港2A-32
Detailed introduction:

网络优化资料:

The principle of selecting valves in the petroleum and chemical industries: the flow path is a straight-through valve with a small flow resistance, and the valve with a cut-off medium and an open medium is generally selected; the valve with easy flow adjustment is better to control the flow; the plug valve and the ball valve are better It is suitable for reversing and shunting; the shut-off part shift solenoid valve slides along the sealing surface of the valve with wiping action, which is most suitable for medium with suspended particles. The following are specific instructions:


Used to shut off and open the valve of the medium.


The flow channel is a straight-through valve, and its flow resistance is small, and it is often selected as a cut-off and open medium. Closed valves (stop valve, plunger valve) are less used due to the curved flow path and large flow resistance; if the flow resistance is large, closed valves can be used;


Second, the valve used to control the flow.


Valves that are easy to adjust the flow rate are often used for flow control. A closed valve (such as a shut-off valve) is suitable for this purpose because its seat diameter is proportional to the stroke of the closing member. Rotary valve (plug valve, butterfly valve, ball valve) and flexible valve body type (pinch valve, diaphragm valve) can also be used for throttling control, but usually only in the case of limited valve diameter. The gate valve uses a disc-shaped gate to cross-cut the circular valve seat port. Only when the cylinder solenoid valve is close to the closed position, the flow can be well controlled, so it is generally not used for flow control.


3. Valves used to switch the shunt.


The valve can have three or more passages, depending on the need for reversing and shunting. In this case, plug valves and ball valves are more suitable. Therefore, most of the valves used for reversing and splitting use two types of valves, plug valves and ball valves. However, there are some cases where other types of valves can also be used to switch the flow, provided that there is a proper connection between two or more valves.


Valves for media with suspended particles.


When there are suspended particles in the medium, it is most suitable for a valve with a wiping effect to slide the closure along the sealing surface. If the reciprocating movement of the closing member to the valve seat is vertical, the particles will be stuck, so this kind of valve can only be used for basic cleaning media, unless the sealing surface material allows particles to be embedded. Since ball valves, plug valves and butterfly valves have a wiping effect on the sealing surface during the opening and closing process, they are suitable for medium with suspended particles.


2A-32

Label

Last: 2A-402021-06-05
Next: 2A-402021-06-05

Recent:

  • 24小时服务热线:

    24小时服务热线:

    15058423660
  • 公司地址:

    公司地址:

    余姚市三七市镇三七市村冯家8号
  • 扫一扫联系我们
    扫一扫联系我们
  • 扫一扫关注我们
    扫一扫关注我们
Technical Support: 华企立方
  • home
  • tel
  • top