产品banner
your current location : Home >> 盐城Stainless steel underwater solenoid valve

盐城2A-15B

2021-06-05 15:33:39
second
盐城2A-15B
Detailed introduction:

网络优化资料:

Avoid staggered valve opening, wrong closing, water leakage and air leakage.


The operator should be clear about the function of each valve and its position in the process pipeline to prevent misoperation, otherwise it will cause accidents such as material leakage, mixing, and pressure holding. For example, a certain oil refining plant carried out steam purging before starting, and a vent valve leaked after being purged when it was started. As a result, the fire solenoid valve caused 370°C high temperature oil slurry to be discharged from the vent valve when it was started, causing a fire and shutting down the imported device.


Seasons when the temperature is below 0°C


The valve that is out of use should be mainly anti-freezing, and the valve bottom wire plug should be opened in time to remove internal condensation. Insulation measures should be taken for valves that cannot be eliminated by gas solenoid valves or that do not work continuously.


Valves that work at high temperatures.


When the temperature is above 200°C, the bolts will be stretched under heat, which will easily make the valve not tightly sealed. The bolts need to be treated with "hot tightness", and the heat tightness treatment should not be carried out in the fully closed position of the valve. It is difficult to reopen the pole to prevent it from topping.


When the valve leaks.


First of all, we must determine the leakage point and its cause. Generally, it can be divided into internal leakage and external leakage. According to its external structure, external leakage can be divided into packing leakage point and bonnet leakage point, valve body leakage point and sealing surface or lining material leakage. The operator should make an accurate judgment, and deal with it in time if he can solve it, and the maintenance staff should deal with it if it can't.


The spool gland should not be pressed too tightly.


When the pressure is too high, the valve stem can be flexibly rotated, increasing the friction of the valve stem, and increasing the operating torque. In the work of the valve, it is generally not possible to replace or add packing under pressure at will, otherwise, it will cause medium leakage and cause danger.


2A-15B

Label

Last: 2A-15B2021-06-05
Next: 2A-20B2021-06-05

Recent:

  • 24小时服务热线:

    24小时服务热线:

    15058423660
  • 公司地址:

    公司地址:

    余姚市三七市镇三七市村冯家8号
  • 扫一扫联系我们
    扫一扫联系我们
  • 扫一扫关注我们
    扫一扫关注我们
Technical Support: 华企立方
  • home
  • tel
  • top